CANOGA PERKINS 9175 Command Reference - Manual (Page 244)

CanogaOS Command Reference
15-35
neighbor-id (Optional) Neighbor ID.
detail (Optional) Displays all neighbors given in detail (lists all neighbors).
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show ip ospf neighbor command showing a single line of
summary information for each neighbor:
Switch# show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
10.199.199.137 1 FULL/DR 0:00:31 192.168.80.37 eth-0-1
172.16.48.1 1 FULL/DROTHER 0:00:33 172.16.48.1 vlan1
172.16.48.200 1 FULL/DROTHER 0:00:33 172.16.48.200 vlan2
10.199.199.137 5 FULL/DR 0:00:33 172.16.48.189 eth-0-2
Related Commands
15.40 show ip ospf virtual-links
To display parameters and the current state of Open Shortest Path First (OSPF) virtual links, use the
show ip ospf virtual-links command in EXEC mode.
Command Syntax
show ip ospf virtual-links
Command Mode
EXEC
Usage
The information displayed by the show ip ospf virtual-links command is useful in debugging OSPF
routing operations.
Examples
The following is sample output from the show ip ospf virtual-links command:
Switch# show ip ospf virtual-links
Virtual Link VLINK0 to router 3.3.3.3 is down
Transit area 1 via interface *
Local address *
Remote address *
Transmit Delay is 1 sec, State Down,