CANOGA PERKINS 9175 Command Reference - Manual (Page 749)

CanogaOS Command Reference
42-8
Related Commands
dhcp-server (global)
42.11 show dhcp relay interfaces
To display to which DHCP server group the interface belongs, use the show dhcp relay interfaces
command in privileged EXEC mode.
Command Syntax
show dhcp relay interfaces
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show dhcp relay interfaces command:
Switch# show dhcp relay interfaces
List of DHCP relay enabled interface(s):
DHCP relay service status: enabled
Interface Name DHCP server group
============================================================
eth-0-1 1
Related Commands
show dhcp-server
42.12 show dhcp relay information config
To display the DHCP relay information configurations, use the show dhcp relay information config
command in privileged EXEC mode.
Command Syntax
show dhcp relay information config
Command Mode
Privileged EXEC
Usage