CANOGA PERKINS 9175 Command Reference - Manual (Page 166)

CanogaOS Command Reference
10-9
Related Commands
10.13 Configure the CFM linktrace cache
Use the command to configure the CFM linktrace cache. You can set a maximum cache size or hold time.
Command Syntax
ethernet cfm linktrace cache
no ethernet cfm linktrace cache
ethernet cfm linktrace cache size ENTRIES
no ethernet cfm linktrace cache size
ethernet cfm linktrace cache hold-time minutes
Command Mode
Configure mode
Default
The default is disable
The default is 100;
Usage
1) For size, enter the cache size in number of entries. The range is from 1 to 65535; the default is100
entries.
2) For hold-time, enter the maximum cache hold time in minutes. The range is from 1 to 65535
minutes; the default is 5 minutes.
3)
Examples
Switch#configure terminal
Switch(config)# ethernet cfm linktrace cache
Switch(config)# ethernet cfm linktrace cache size 100
Switch(config)# ethernet cfm linktrace cache hold-time 60
Related Commands
10.14 Configuring mip ccm fdb hold time
Use this command to configure the mip ccm fdb hold time.