CANOGA PERKINS 9175 Command Reference - Manual (Page 157)

CanogaOS Command Reference
9-9
Command Syntax
vlan dot1q tag native
no vlan dot1q tag native
Command Mode
Global configuration
Usage
Use this command to enable tagging native. By default, native vlan should untagged when packet
sending out of port.
Examples
Switch(config)# vlan dot1q tag native
Related Commands
None
9.18 show dot1q ethertype
Use this command to display dot1q ethertype.
Command Syntax
show dot1q ethertype [interface IFNAME]
IFNAME: 802.1q interface configuration
Command Mode
Privileged EXEC
Usage
None
Examples
Switch# show dot1q ethertype interface eth-0-1
Related Commands
None