CANOGA PERKINS 9175 Command Reference - Manual (Page 118)

CanogaOS Command Reference
7-15
7.23 spanning-tree restricted-role
Use this command to set the restricted-role value of the port to TRUE. Use the no parameter with this
command to set the restricted-role value of the port to FALSE.
Command Syntax
spanning-tree restricted-role
no spanning-tree restricted-role
Command Mode
Interface mode
Default
The default restricted-role value is FALSE.
Usage
Examples
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# spanning-tree restricted-role
Related Commands
7.24 spanning-tree instance priority
Use this command to set the port priority for a bridge group. Use the no parameter with this command to
restore the default priority value.
Command Syntax
spanning-tree instance instance-id port-priority priority
no spanning-tree instance instance-id port-priority
instance-id Specify the identifier.
priority Specify the port priority (a lower priority indicates greater likelihood of the
interface becoming a root). The range is 0 to 240.
Command Mode
Interface mode
Default
The default value of port priority for each instance is 128.
Usage