CANOGA PERKINS 9175 Command Reference - Manual (Page 576)

CanogaOS Command Reference
32-1
32 H-QoS Command
32.1 qos sap-egress
Use this command to create an SAP (Service Access Point) egress policy for H-QoS. The SAP egress
policy defines the SLA (Service Level Agreement) for EVCs as they leave the egress UNI. To remove
the egress policy, use the no form of this command.
Command Syntax
qos sap-egress POLICY-NAME
no qos sap-egress POLICY-NAME
POLICY-NAME: The name, containing at most 40 characters, identifies an unique SAP egress policy for
H-QoS. The valid policy name should be initiated within the numbers and alphabet and the remain
characters can additionally include “.”, “-”, “_”.
Command Mode
Global configuration
Usage
None
Examples
In the following example, the qos sap-egress command is used to create an SAP egress policy for
H-QoS.
Switch(config)# qos sap-egress evc110-policy-at-egress-uni
Related Commands
None
32.2 description
Use this command to add a description for the SAP egress policy. To remove the description, use the no
form of this command.
Command Syntax
description TEXT
no description
TEXT: The description text generally used to describe the usage of the SAP egress policy. The length of
the text can be up to any visible 200 characters.
Command Mode
SAP Egress Policy Configuration