CANOGA PERKINS 9175 Command Reference - Manual (Page 655)

CanogaOS Command Reference
39-2
copy source-name destination-name
source-name The location URL of the source file or directory to be copied. The source can be either local or
remote, depending upon whether the file is being downloaded or uploaded.
destination-name The destination URL of the copied file or directory. The destination can be either local or
remote, depending upon whether the file is being downloaded or uploaded.
Command Mode
Privileged EXEC
Usage
The exact format of the source and destination URLs varies according to the file or directory location. You
may enter a particular file or a filename that follows the standard file system syntax
(filesystem:[/filepath][/filename]).
Examples
The following example shows how to specify image verification before copying an image:
Switch# copy tftp://192.168.0.1/image flash:/boot/image
Download from URL to temporary file.
Get file from tftp://192.168.0.1/image
..............................................................................................................
Received 15591515 bytes in 16.6 seconds
Copy the temporary file to its destination.
..............................................................................................................
15591515 bytes in 69.8 seconds, 218 kbytes/second
Switch#
Related Commands
delete
39.3 delete
To delete a file on the flash, use the delete command in Privileged EXEC mode.
Command Syntax
delete file-name
file-name The file name that is supposed to be deleted.
Command Mode
Privileged EXEC
Usage
If you attempt to delete the configuration file or image, the system prompts you to confirm the deletion.
Also, if you attempt to delete the system specified file such as DHCP snooping bindings, the system
prompts you to confirm the deletion.