CANOGA PERKINS 9175 Command Reference - Manual (Page 431)

CanogaOS Command Reference
25-19
Related Commands
hello-interval
ldp hello-interval
ldp hold-time
25.21 keepalive-interval
Use this command to set the global value for the interval after which keep-alive
packets are sent out. Use the no parameter to revert to default keep-alive
interval.
Command Syntax
(no) keepalive-interval number
Syntax Description
number Specifies the value of interval in seconds, the
range is 10 to 21845
Command Mode
Router mode
Defaults
The default is 10 seconds.
Examples
In the following example, the keepalive-interval command is used to set the
global value for the interval after which keep-alive packets are sent out:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)# keepalive-interval 635
Related Commands
keepalive-timeout
ldp keepalive-interval
ldp keepalive-timeout