CANOGA PERKINS 9175 Command Reference - Manual (Page 316)

CanogaOS Command Reference
17-4
of 200 is higher than that of the current master virtual router.
router vrrp 1
preempt-mode true
priority 200
Related Commands
router vrrp
17.5 priority (VRRP)
To set the priority level of the router within a Virtual Router Redundancy Protocol (VRRP) group, use the
priority command in router configuration mode. To remove the priority level of the router, use the no
form of this command.
Command Syntax
priority level
no priority
level Priority of the router within the VRRP group. The range is from 1 to 254. The default
is 100.
Default
Default priority is 100.
Command Mode
Router configuration
Usage
Use this command to control which router becomes the master virtual router.
Examples
The following example configures the router with a priority of 254:
router vrrp 1
priority 254
Related Commands
router vrrp
17.6 router vrrp
To create a Virtual Router Redundancy Protocol (VRRP) group, use the router vrrp command in global
configuration mode. To remove this VRRP group, use the no form of this command.