CANOGA PERKINS 9175 Command Reference - Manual (Page 783)

CanogaOS Command Reference
46-4
46.6 temperature
To specify the system termperature monitor threshold
Command Syntax
termperature <0-50> <50-90> <50-90>
no termperature
<0-50>: Lower threshold.
<50-90>: High threshold.
<50-90>: Critcal threshold.
Command Mode
Global configuration mode
Usage
The unit for temperature is centigrade.
The default threshold is low temperature 5, high temperature 60, critical temperature 75.
The range for low temperature is from 0 to 50.
The range for high temperature is from 50 to 90.
The range for critical temperature is from 50 to 90.
The critical temperature must higher than high temperature 5 Celsiur degrees.
Examples
This example shows how to specify the temperature thresholds
Switch# configure terminal
Switch(config)# temperature 5 55 65
Related Commands
show environment
46.7 management ip address
To specify the IP address for supervisor card management port.
Command Syntax
management ip address ip-address/mask <1-2>
management ip address ip-address/mask <7-8>
no management ip address <1-2>
no management ip address <7-8>
ip-address/mask: IP address and mask number
<1-2>: supervisor card slot number on
9175-006.
<7-8>: supervisor card slot number on
9175-014.
Command Mode
Global configuration mode