CANOGA PERKINS 9175 Command Reference - Manual (Page 458)

CanogaOS Command Reference
25-46
detail Show detailed information
VPLS_ID Specifies the VPLS identifier, the range is 1 to
4294967295.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp vpls command is used to display
information about all VPLS instances:
Switch# show ldp vpls
VPLS-ID Peer Address State Type Label-Sent Label-Rcvd
1 192.168.0.80 Up vpls 16 640
1 192.168.0.90 Up vpls 18 642
2 192.168.0.80 Up vpls 19 641
2 192.168.0.90 Up vpls 17 643
Related Commands