CANOGA PERKINS 9175 Command Reference - Manual (Page 709)

CanogaOS Command Reference
40-38
Related Commands
40.50 debug dhcp relay
To display debugging information about the Dynamic Host Configuration Protocol (DHCP) relay and to
monitor the status of DHCP packets, use the debug dhcp relay command in privileged EXEC mode. To
disable debugging output, use the no form of this command.
Command Syntax
debug dhcp relay {all | dump | error | events | packet}
no debug dhcp relay {all | dump | error | events | packet}
all Debug all information of DHCP relay.
dump Specify the output as format of Hexadecimal.
error Debug error information of DHCP relay.
events Debug events of DHCP relay.
packet Decodes DHCP receptions and transmissions.
Command Mode
Privileged EXEC
Usage
Examples
The following example shows a combination of DHCP relay events and decoded receptions and
transmissions::
Switch# debug dhcp relay events
Switch# debug dhcp relay packet
Related Commands
debug dhcp snooping
40.51 debug dhcp snooping
To display debugging information about the Dynamic Host Configuration Protocol (DHCP) snooping and
to monitor the status of DHCP packets, use the debug dhcp snooping command in privileged EXEC
mode. To disable debugging output, use the no form of this command.
Command Syntax
debug dhcp snooping {all | dump | error | events | packet}
no debug dhcp snooping {all | dump | error | events | packet}
all Debug all information of DHCP snooping.