CANOGA PERKINS 9175 Command Reference - Manual (Page 218)

CanogaOS Command Reference
15-9
15.9 compatible rfc1583
To restore the method used to calculate summary route costs per RFC 1583, use the compatible
rfc1583 command in router configuration mode. To disable RFC 1583 compatibility, use the no form of
this command.
Command Syntax
compatible rfc1583
no compatible rfc1583
Default
Not compatible with RFC 1583.
Command Mode
Router configuration
Usage
To minimize the chance of routing loops, all Open Shortest Path First (OSPF) routers in an OSPF routing
domain should have RFC compatibility set identically.
Because of the introduction of RFC 2328, OSPF Version 2, the method used to calculate summary route
costs has changed. Use the no compatible rfc1583 command to enable the calculation method used
per RFC 2328.
Examples
The following example specifies that the router process is compatible with RFC 1583:
router ospf 1
compatible rfc1583
Related Commands
15.10 default-information originate (OSPF)
To generate a default external route into an Open Shortest Path First (OSPF) routing domain, use the
Default -information originate command in router configuration mode. To disable this feature, use the
no form of this command.
Command Syntax
default-information originate [always] [metric metric-value] [metric-type type-value]
no default-information originate [always] [metric] [metric-type]
always (Optional) Always advertises the default route regardless of
whether the software has a default route.
metric metric-value (Optional) Metric used for generating the default route. If you omit
a value and do not specify a value using the default-metric router