CANOGA PERKINS 9175 Command Reference - Manual (Page 777)

CanogaOS Command Reference
45-5
Switch (config)# sflow sample output
Switch (config)# interface eth-0-2
Switch (config)# switchport
Switch (config)# sflow sample output
% Warning: sFlow sample on switchport would be restricted if VLAN ACL is
configured
Related Commands
45.7 show sflow
Use this command to show the running information of sFlow.
Command Syntax
show sflow
Command Mode
Exec mode
Usage
Examples
This example shows how to show the sflow running information.
Switch#show sflow
sFlow Global Information:
Agent IP : 0.0.0.0
Counter Sampling Interval : 20 seconds
Collector IP : Not configured
sFlow Port Information:
Sample Sample
Port Counter Sample Direction Rate
--------------------------------------------------------
eth-0-1 Disable Disable N/A 32768
eth-0-2 Enable Disable N/A N/A
eth-0-3 Disable Enable Both 32768
Related Commands
45.8 debug sflow
Use this command to debug sFlow.