CANOGA PERKINS 9175 Command Reference - Manual (Page 56)

CanogaOS Command Reference
4-12
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the management ip address.
Switch# show management ip address
Management IP address is:
192.168.100.101/24 broadcast 192.168.100.255
Related Commands
Management ip address
4.19 show transceiver
Use this command to show the transceiver information.
Command Syntax
Show transceiver {detail|interface INTERFACE_NAME}
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the transceiver information.
Switch# show transceiver interface eth-0-21
Interface eth-0-21 transceiver info: Present
Transceiver Type : 1000BASE-LX
Transceiver Vendor Name : LambdaGain
Transceiver PN : LG-SSG11-31/D
Transceiver S/N : 8A20090610
Transceiver Wavelength : 1310 nm
Supported Fiber Type and Length:
Link Length for 9/125um single mode fiber: 10 km
Link Length for 9/125um single mode fiber: 10000 m
--------------------------------------------------------------------------------------------------------------
Transceiver is externally calibrated.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.