CANOGA PERKINS 9175 Command Reference - Manual (Page 343)

CanogaOS Command Reference
19-12
match origin { egp | igp | incomplete }
no match origin
Syntax Description
egp learned from EGP.
igp Local IGP
incomplete Unknown heritage
Command Mode
Route-map mode
Defaults
No match origin is specified by default.
Examples
Switch# configure terminal
Switch(config)# route-map myroute deny 34
Switch(config-route-map)# match origin egp
Related Commands
19.12 match route-type
Use this command to match specified external route type.
Use the no parameter with this command to turn off the matching.
Use the match route-type external command to match specific external route types. AS-external
LSA is either Type-1 or Type-2. External type-1 matches only Type 1 external routes, and
external type-2 matches only Type 2 external routes.
Note:
This command is valid for OSPF only.
Command Syntax
match route-type external { type-1 | type-2 }
no match route-type external
Syntax Description
type-1 Match OSPF External Type 1 metrics.
type-2 Match OSPF External Type 1 metrics.
Command Mode