CANOGA PERKINS 9175 Command Reference - Manual (Page 686)

CanogaOS Command Reference
40-15
length of the zone argument is limited to 32 characters.
add The positive time zone.
minus The negative time zone.
hours-offset Hours difference from UTC.
minutes-offset (Optional) Minutes difference from UTC.
seconds-offset (Optional) Seconds difference from UTC.
Command Mode
Global configuration
Default
UTC
Usage
The system internally keeps time in UTC, so this command is used only for display purposes and when
the time is manually set.
Examples
The following example sets the time zone to Pacific Standard Time (PST), which is 8 hours behind UTC:
Switch(config)# clock set timezone PST minus 8
The following example sets the time zone to Atlantic Time (AT) for Newfoundland, Canada, which is 3.5
hours behind UTC:
Switch(config)# clock set timezone AT minus 3 30
Related Commands
show clock
clock set datetime
40.24 clock set summertime
To configure the system to automatically switch to summer time (daylight saving time), use one of the
formats of the clock set summer-time command in global configuration mode. To configure the switch
not to automatically switch to summer time, use the no form of this command.
Command Syntax
clock set summer-time zone recurring month day hh:mm month day hh:mm offset
clock set summer-time zone date month date year hh:mm month date hh:mm year offset
no clock summer-time
zone Name of the time zone to be displayed when standard time is in effect. The length of
the zone argument is limited to 32 characters.
recurring Indicates that summer time should start and end on the corresponding specified days
every year.
date Indicates that summer time should start on the first specific date listed in the
command and end on the second specific date in the command.