CANOGA PERKINS 9175 Command Reference - Manual (Page 473)

CanogaOS Command Reference
26-15
This command has no arguments or settings.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls lsp-tunneling command is used to
display MPLS LSP-Tunneling:
Switch1# show mpls lsp-tunneling
Codes: > - selected ILM
Code I/O Label FEC Out-Intf
200/300 5.5.5.0/24 N/A
Related Commands
26.18 show mpls mapped-routes
Use this command to display mapped MPLS routes.
Comm a nd Syntax
show mpls mapped-routes
Syntax description
This command has no arguments or settings.
Command Mode