CANOGA PERKINS 9175 Command Reference - Manual (Page 258)

CanogaOS Command Reference
16-13
• Neighbor deleted
• Member added to peer group
• Administrative shutdown
• Remote AS changed
• RR client configuration modification
• Soft reconfiguration modification
Example
Switch# configure terminal
Switch(config)# router bgp 100
Switch(config-router)# bgp log-neighbor-changes
16.19 bgp router-id
Use this command to configure the router identifier.
Use the no parameter with this command to disable this function
Command Syntax
(no) bgp router-id ROUTERID
ROUTERID = A.B.C.D Manually configured router ID.
Default
In case the loopback interface is configured the router-id is set to the IP address of a loopback interface.
If not, the highest IP address is the router-id.
Command Mode
Router mode
Usage
Use bgp router-id command to manually configure a fixed router ID as a BGP router identifier.
Examples
Switch# configure terminal
Switch(config) router bgp 100
Switch(config-router) bgp router-id 1.1.2.3
16.20 bgp scan-time
Use this command to set the interval for BGP route next-hop scanning.
Use the no parameter with this command to disable this function.
Command Syntax
(no) bgp scan-time TIME