CANOGA PERKINS 9175 Command Reference - Manual (Page 685)

CanogaOS Command Reference
40-14
key2 public 0 1024
Related Commands
show rsa key
40.22 clock set datetime
To manually set the system software clock, use the formats of the clock set command in global
configuration mode.
Command Syntax
clock set hh:mm:ss month day year
hh:mm:ss Current time in hours (24-hour format), minutes, and seconds.
month Current month (by number).
day Current day (by date) in the month.
year Current year (no abbreviation). From 2000 to 2037.
Command Mode
Global configuration
Usage
Generally, if the system is synchronized by a valid outside timing mechanism, such as a Network Time
Protocol (NTP), or if you have a switch with hardware clock, you need not set the software clock. Use
this command if no other time sources are available. The time specified in this command is assumed to
be in the timezone specified by the configuration of the clock timezone command.
Examples
The following example manually sets the software clock to 7:29 p.m. on May 13, 2003:
Switch(config)# clock set 19:29:00 5 13 2003
Related Commands
show clock
clock set timezone
40.23 clock set timezone
To set the time zone for display purposes, use the clock set timezone command in global configuration
mode. To set the time to Coordinated Universal Time (UTC), use the no form of this command.
Command Syntax
clock set timezone zone {add | minus} hours-offset [minutes-offset] [seconds-offset]
zone Name of the time zone to be displayed when standard time is in effect. The