CANOGA PERKINS 9175 Command Reference - Manual (Page 645)

CanogaOS Command Reference
37-8
overrides the global setting of the radius-server key command. If no key string is
specified, the global value is used.
string (Optional) Specifies the authentication and encryption key for all RADIUS
communications between the router and the RADIUS server. This key must
match the encryption used on the RADIUS daemon.
Default
No RADIUS host is specified; use global radius-server command values.
Command Mode
Global configuration
Usage
You can use multiple radius-server host commands to specify multiple hosts. The software searches for
hosts in the order in which you specify them.
If no host-specific timeout, retransmit, or key values are specified, the global values apply to each host.
Examples
The following is sample output from the radius-server host command:
Switch(config)# radius-server host 10.10.1.1 key abcde
Related Commands
radius-server key
radius-server timeout
37.11 radius retransmit
To specify the number of times the switch searches the list of RADIUS server hosts before giving up, use
the radius-server retransmit command in global configuration mode. To disable retransmission, use
the no form of this command.
Command Syntax
radius-server retransmit retries
no radius-server retransmit
retries Maximum number of retransmission attempts. The range is 0 to 100. The default is 3.
Default
3 attempts
Command Mode
Global configuration
Usage
The switch tries all servers, allowing each one to time out before increasing the retransmit count.