CANOGA PERKINS 9175 Command Reference - Manual (Page 665)

CanogaOS Command Reference
39-12
key chain Displays key chain information.
policy-map Displays policy map information.
prefix-list Displays IPv4 prefix list information.
router bgp Displays BGP configuration information.
router ospf Displays OSPFv2 configuration information.
router rip Displays RIP configuration information.
router vrrp Displays VRRP configuration information.
router-id Displays router ID information.
switch dot1x Displays IEEE 802.1x information.
switch mstp Displays MSTP configuration information.
switch radius-server Displays radius server information.
switch rstp Displays RSTP configuration information.
switch vlan Displays VLAN database information.
vrf Displays IP vrf information.
Default
The show running-config command without any arguments or keywords displays the entire contents of
the running configuration file.
Command Mode
Privileged EXEC, global configuration, submode of global configuration
Usage
The show running-config interface command is useful when there are multiple interfaces and you
want to look at the configuration of a specific interface.
Examples
The following example shows the configuration for serial interface 1:
Switch# show running-config interface eth-0-1
Building configuration...
Current configuration:
!
interface eth-0-1
no switchport
ip address 192.168.0.1/24
shutdown
end
Related Commands
configure terminal
show startup-config