CANOGA PERKINS 9175 Command Reference - Manual (Page 368)

CanogaOS Command Reference
21-1
21 IGMP Commands
21.1 ip igmp access-group
Use this command to apply an access-list to the igmp interface.
To remove this setting, use the no form of this command.
Command Syntax
ip igmp access-group list
no ip igmp access-group
list: the name of the ip access-list to be applied
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to apply the access-list acl1 to the interface vlan1.
Switch(config-if)# ip igmp access-group acl1
This example shows how to remove the access-list acl1 on the interface.
Switch(config-if)# no ip igmp access-group
Related Commands
show ip igmp interface
21.2 ip igmp immediate-leave group-list
Use this command to apply an access-list to configure which groups support immediately-leave per
interface.
To remove this setting, use the no form of this command.
Command Syntax
ip igmp immediate-leave group-list list
no ip igmp immediate-leave group-list
list: the name of the ip access-list to be applied
Command Mode
Interface configuration
Usage
None