CANOGA PERKINS 9175 Command Reference - Manual (Page 181)

CanogaOS Command Reference
11-9
Use this command to stop an Ethernet OAM remote loopback mechanism.
Usage
Use this command to stop an Ethernet OAM remote loopback mechanism.
Examples
Switch# configure terminal
Switch# ethernet oam remote-loopback stop interface eth-0-9
11.14 ethernet oam timeout
Use this command to reset the LOCAL_LOST_LINK_TIMER and start an Ethernet OAM
discovery process. Use the no form of the command to reset to the default value.
.
Command Syntax
ethernet oam timeout SECONDS
no ethernet oam timeout
SECONDS The number of seconds chosen for the link-timer in the range <2-30>
Command Mode
Interface mode
Default
The default value of the timeout is 5 seconds
Usage
This command is used to start a discovery process by resetting the
LOCAL_LOST_LINK_TIMER.
Examples
Switch # configure terminal
Switch (config)# interface eth1
Switch (config-if)# ethernet oam timeout 5
11.15 show ethernet oam discovery interface
Use this command to display the ethernet oam adminstrative and operation configuration
for local and remote DTE
Command Syntax
show ethernet oam discovery ( interface IFNAME|)
IFNAME Name of the interface
Command Mode
Privileged Exec mode