CANOGA PERKINS 9175 Command Reference - Manual (Page 138)

CanogaOS Command Reference
8-2
primary: primary ring
sub: sub ring
vlan : <2-4094> VLAN ID
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set vlan 16 as primary control vlan for erps domain 11.
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan database
Switch(config-vlan)#vlan 16
Switch(config-vlan)#exit
Switch(config)#erps 11 primary control vlan 16
And you can check the result by using “show erps 11” command.
Switch# show erps 11
Switch# show erps 11
ERPS domain ID: 11
ERPS domain name: test11
ERPS domain primary control VLAN ID: 16
ERPS domain sub control VLAN ID: 0
ERPS domain hello timer interval: 1 second(s)
ERPS domain fail timer interval: 3 second(s)
Related Commands
None
8.3 erps hellotime | failtime
Use this command to set/reset hello or fail timer interval for specific erps domain instance.
Command Syntax
erps ERPS_ID {hellotime | failtime} <1-15>
no erps ERPS_ID {hellotime | failtime}
ERPS_ID : <1-255> ERPS domain ID
hellotime: hello timer interval
failtime: fail timer interval
<1-15>: seconds
Command Mode