CANOGA PERKINS 9175 Command Reference - Manual (Page 401)

CanogaOS Command Reference
24-6
ip pim jp-timer jp-timer
no ip pim jp-timer
jp-timer : <1-65535> Join/Prune timer value (second)
Defaults
60 seconds
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the join/prune timer value to 100s.
Switch(config)#ip pim jp-timer 100
This example shows how to return the join/prune timer value to default value.
Switch(config)#no ip pim jp-timer
Related Commands
None
24.10 ip pim neighbor-filter
Use this command to add an access-list to filter the neighbor.
To remove this filter, use the no form of this command.
Command Syntax
ip pim neighbor-filter list
list: the name of the access-list
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to establish neighbors based on access-list acl1.
Switch(config-if)#ip pim neighbor-filter acl1
This example shows how to cancel the filter.
Switch(config-if)#no ip pim neighbor-filter
Related Commands
None