CANOGA PERKINS 9175 Command Reference - Manual (Page 750)

CanogaOS Command Reference
42-9
Examples
The following is sample output from the show dhcp relay information config command:
Switch# show dhcp relay information config
DHCP relay agent information configuration:
============================================================
no dhcp relay information option
dhcp relay information check
dhcp relay information policy keep
Related Commands
dhcp relay information option
42.13 show dhcp relay information trusted-sources
To display all interfaces configured to be a trusted source for the Dynamic Host Configuration Protocol
(DHCP) relay information option, use the show dhcp relay information trusted-sources command in
privileged EXEC mode.
Command Syntax
show dhcp relay information trusted-sources
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show dhcp relay information trusted-sources command:
Switch# show dhcp relay information trusted-sources
List of trusted sources of relay agent information option:
============================================================
All interfaces are trusted source of relay agent information option
Related Commands
dhcp relay information trusted
42.14 show dhcp relay statistics
To display the statistics of DHCP packets relayed by the switch, use the show dhcp relay statistics
command in privileged EXEC mode.