CANOGA PERKINS 9175 Command Reference - Manual (Page 70)

CanogaOS Command Reference
5-3
Command Syntax
lacp system-priority priority
priority: <1-65535>
Command Mode
Global configuration
Defaults
32768
Usage
None
Examples
This example shows how to configure the system priority 100 for the Link Aggregation Control
Protocol (LACP):
Switch (config)# lacp system-priority 100
This example shows how to return to the default setting:
Switch(config)# no lacp system-priority
Related Commands
None
5.5 show channel-group summary
Use this command to display a summary of all of the channel groups, or a specified channel group.
Command Syntax
show channel-group [channel-group-number] summary
channel-group-number: <1-255>
Command Mode
EXEC
Usage
None
Examples
This example shows how to display a summary of all of the channel groups:
6ZLWFKVKRZFKDQQHOJURXSVXPPDU\
)ODJVVVXVSHQG,VWDQGDORQH
'GRZQDGPLQGRZQ%LQ%XQGOH