CANOGA PERKINS 9175 Command Reference - Manual (Page 69)

CanogaOS Command Reference
5-2
None
Examples
This example shows how to configure the port priority 100 for the Link Aggregation Control
Protocol (LACP):
Switch (config-if)# lacp port-priority 100
This example shows how to return to the default setting:
Switch (config-if)# no lacp port-priority
Related Commands
None
5.3 lacp timeout
Use this command to configure the port timeout for the Link Aggregation Control Protocol (LACP). Use
the no form of this command to return to the default setting.
Command Syntax
lacp timeout {short | long}
Command Mode
Interface configuration
Defaults
long
Usage
None
Examples
This example shows how to configure the port timeout short for the Link Aggregation Control
Protocol (LACP):
Switch (config-if)# lacp timeout short
This example shows how to return to the default setting:
Switch (config-if)# lacp timeout long
Related Commands
None
5.4 lacp system-priority
Use this command to configure the system priority for the Link Aggregation Control Protocol (LACP). Use
the no form of this command to return to the default setting.