CANOGA PERKINS 9175 Command Reference - Manual (Page 295)

CanogaOS Command Reference
16-50
natural class boundary, and hence, is
perceived as a host route, that is, 1.2.3.0/32.
Switch(config)#router bgp 1
Switch(config-router)#network 1.2.3.0
Switch#show run
!
router bgp 1
no synchronization
network 1.2.3.0 mask 255.255.255.255
16.75 network synchronization
Use this command to ensure the exact same static network prefix, specified through any of the network
commands, is local or has IGP reachability (in the NSM RIB) before being introduced into the BGP
RIB.
Use the no parameter with this command to disable this function.
Command Syntax
(no) network synchronization
Default
Network synchronization is disabled by default.
Command Mode
Router mode
Address Family mode
ipv4 unicast
ipv4 multicast
ipv6 unicast
Examples
The following example enables IGP synchronization of BGP static network routes in the router
configuration mode.
Switch# configure terminal
Switch(config)# router bgp 11
Switch(config-router)# network synchronization
The following example enables IGP synchronization of BGP static network routes
in the IPv6-Unicast address family.
Switch# configure terminal
Switch(config)# router bgp 11
Switch(config)# address-family ipv6 unicast
Switch(config-af)# network synchronization