CANOGA PERKINS 9175 Command Reference - Manual (Page 771)

CanogaOS Command Reference
44-16
Command Mode
Privileged EXEC
Usage
An SNMP user must be part of an SNMP group, as configured using the snmp-server usm-user
command.
Examples
The following is sample output from the show snmp-server usm-user command:
Switch# show snmp-server usm-user user1
EnginedID: 01234567890123456789
User Name: user1
Auth Protocol:
priv Protocol:
Storage Type: nonvolatile
Row status: active
Related Commands
44.24 show snmp-server version
To display the supported version of SNMP, use the show snmp-server version command in privileged
EXEC mode.
Command Syntax
show snmp-server usm-user
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show snmp-server usm-user command:
Switch# show snmp-server usm-user user1
EnginedID: 01234567890123456789
User Name: user1
Auth Protocol:
priv Protocol:
Storage Type: nonvolatile
Row status: active
Related Commands