CANOGA PERKINS 9175 Command Reference - Manual (Page 115)

CanogaOS Command Reference
7-12
Usage
This command supersedes the bridge level configuration for the BPDU Guard feature. When the enable
or disable parameter is used with this command, this configuration takes precedence over bridge
configuration. However, when the default parameter is used with this command, the bridge-level BPDU
Guard configuration takes effect. Use the bridge spanning-tree portfast bpdu-guard command to
configure the BPDU Guard feature on a bridge.
Use the show spanning-tree command to display the bridge and port configurations for the BPDU Guard
feature. It shows both the administratively configured and currently running values of the BPDU guard.
Examples
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# spanning-tree edgeport bpdu-guard enable
Related Commands
7.19 spanning-tree edgeport bpdu-filter
Use this command to set edgeport BPDU filter for the port. Use the no parameter with this command to
revert the port BPDU filter value to default.
Command Syntax
spanning-tree edgeport bpdu-filter {enable | disable | default}
no spanning-tree edgeport bpdu-filter
Command Mode
Interface mode
Default
Usage
Use this command to set the BPDU filter value for individual ports. When the enable or disable
parameter is used with this command, this configuration takes precedence over bridge configuration.
However, when the default parameter is used with this command, the bridge level BPDU filter
configuration takes effect for the port. Use the bridge spanning-tree portfast bpdu-filter command to
configure the BPDU filter feature on a bridge.
Use the show spanning tree command to display administratively configured, and currently running
values, of the BPDU filter parameter for the bridge and port.
Examples
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# spanning-tree edgeport bpdu-filter