CANOGA PERKINS 9175 Command Reference - Manual (Page 139)

CanogaOS Command Reference
8-3
Global configuration
Usage
None
Examples
This example shows how to set fail timer interval of erps domain 11 to 5s.
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# erps 11 failtime 5
Switch# show erps 11
ERPS domain ID: 11
ERPS domain name: test11
ERPS domain primary control VLAN ID: 16
ERPS domain sub control VLAN ID: 0
ERPS domain hello timer interval: 1 second(s)
ERPS domain fail timer interval: 5 second(s)
Related Commands
None
8.4 erps ring level
Use this command to create/remove an ERPS ring for specific ERPS domain.
Command Syntax
erps ERPS_ID ring RING_ID level {primary | sub}
no erps ERPS_ID ring
ERPS_ID : <1-255> ERPS domain ID
RING_ID : <1-255> ERPS ring ID
level: ring level
primary: primary ring
sub: sub ring
Command Mode
Global configuration
Usage
Only one ERPS primary ring is allowed to be created per domain.
Examples
This example shows how to create a sub ring with ID 1 for ERPS domain 11.
Switch# configure terminal