CANOGA PERKINS 9175 Command Reference - Manual (Page 427)

CanogaOS Command Reference
25-15
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp vc events command is used to debug
Layer-2 Virtual Circuit information:
Switch# debug ldp vc events
Related Commands
debug ldp dsm
debug ldp usm
25.16 disable-ldp
Use this command to disable LDP on a specified interface.
Note:
This command disables the transmission of Hello packets through
the current interface, and clears all created sessions and
adjacencies for this interface.
Command Syntax
disable-ldp
Syntax Description
This command has no arguments or keywords.
Command Mode
Interface mode
Defaults
This command has no default settings.
Examples
In the following example, the disable-ldp command is used to disable LDP on
a specified interface:
Switch # configure terminal
Switch (config)# interface eth0