CANOGA PERKINS 9175 Command Reference - Manual (Page 717)

CanogaOS Command Reference
40-46
Usage
If you specify the month and day, the reload is scheduled to take place at the specified time and date. If
you do not specify the month and day, the reload takes place at the specified time on the current day.
Examples
The following example is sample dialog from the schedule reboot at command.
Switch(config)# schedule reboot at 12:12 2008/12/25
Related Commands
schedule reboot delay
40.62 schedule reboot delay
To schedule a reload of the software to take place after the specified time, use the schedule reboot
delay command in global configuration mode. To cancel the scheduled reboot task, use the no form of
this command.
Command Syntax
schedule reboot delay {HH:MM | minutes}
no schedule reboot
HH:MM The hour and minutes. The time range is 00:00 – 23:59.
minutes The minutes. The range is 1 – 720.
Default
No scheduled reboot task is defined.
Command Mode
Global configuration
Usage
Examples
The following example is sample dialog from the schedule reboot delay command.
Switch(config)# schedule reboot delay 300
Related Commands
schedule reboot at
40.63 show boot
To display the current image and the image the next startup will load, use the show boot command in