CANOGA PERKINS 9175 Command Reference - Manual (Page 372)

CanogaOS Command Reference
21-5
Interface configuration
Usage
This command is used with command ip igmp mroute-proxy and to set the upstream interface of the
igmp group.
Examples
This example shows how to enable igmp mroute proxy service on this interface.
Switch(config-if)# ip igmp proxy-service
This example shows how to disable igmp mroute proxy service.
Switch(config-if)# no ip igmp proxy-service
Related Commands
ip igmp mroute-proxy
21.8 ip igmp querier-timeout
Use this command to set the igmp previous querier timeout value.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp querier-timeout <60-300>
no ip igmp querier-timeout
<60-300>: the igmp previous querier timeout value
Command Mode
Interface configuration
Defaults
255 seconds
Usage
None
Examples
This example shows how to set the igmp previous querier timeout value to 100 seconds.
Switch(config-if)#ip igmp querier-timeout 100
This example shows how to return the igmp previous querier timeout value to default value.
Switch(config-if)#no ip igmp querier-timeout
Related Commands
ip igmp query-interval
ip igmp query-max-response-time