CANOGA PERKINS 9175 Command Reference - Manual (Page 419)

CanogaOS Command Reference
25-7
25.8 debug ldp dsm
Use this command to write Downstream state machine specific information to
the output.
Note:
On using a debug command, the router continues to generate an
output until the no parameter is used with the command. The
debug output and system error messages are written on the
virtual terminal. Use the log file or log syslog command in
configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
(no) debug ldp dsm
Syntax Description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp dsm command is used to write
Downstream state machine specific information to the output:
Switch# debug ldp dsm
Related Commands
debug ldp fsm
debug ldp packet