CANOGA PERKINS 9175 Command Reference - Manual (Page 182)

CanogaOS Command Reference
11-10
Usage
The following sample output from this command displays ethenet oam adminstrative and
operation configurations for local and remote DTE
Example
Switch1# show ethernet oam discovery interface eth-0-1
11.16 show Ethernet oam status interface
Use this command to display the runtime settings of link-monitoring and general OAM operations for all
interfaces or for a specific interface
Command Syntax
show ethernet oam status ( interface IFNAME|)
IFNAME Name of the interface
Command Mode
Privileged Exec mode
Usage
Examples
Switch1# show ethernet oam status interface eth-0-1
11.17 show ethernet oam state-machine interface
Use this command to display the state machine information.
Command Syntax
show ethernet oam state-machine ( interface IFNAME|)
IFNAME Name of the interface
Command Mode
Privileged Exec mode
Usage
The command displays the operational discovery state machine of the interface.
Examples
Switch# show ethernet oam state-machine interface eth-0-1