CANOGA PERKINS 9175 Command Reference - Manual (Page 623)

CanogaOS Command Reference
34-8
Command Mode
Privileged EXEC
Usage
To display all entries in the ARP cache, use this command without any arguments or keywords.
Examples
This example shows how to display the configuration and operating state of DAI for VLAN 1:
Switch# show ip arp inspection vlan 1
Source Mac Validation : Enabled
Destination Mac Validation : Disabled
IP Address Validation : Disabled
Vlan Configuration ACL Match Static ACL
=================================================================
1 enabled b
Vlan ACL Logging DHCP Logging
=================================================================
1 deny deny
Related Commands
arp access-list
34.9 show ip arp inspection log
To show the status of the log buffer, use the show ip arp inspection log command in privileged EXEC
mode.
Command Syntax
show ip arp inspection log
Command Mode
Privileged EXEC
Usage
To display all entries in the ARP cache, use this command without any arguments or keywords.
Examples
This example shows how to display the current contents of the log buffer before and after the buffers are
cleared:
Switch# show ip arp inspection log
Total Log Buffer Size : 45
Syslog rate : 5 entries per 1 seconds.
No entries in log buffer.