CANOGA PERKINS 9175 Command Reference - Manual (Page 383)

CanogaOS Command Reference
22-3
22.4 ip igmp snooping max-member-num
Use this command to set the max member number of igmp snooping.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp snooping max-member-num <1-4096>
no ip igmp snooping max-member-num
<1-4096>: the max member number of igmp snooping
Defaults
4096
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the max member number of igmp snooping to 1024.
Switch(config)# ip igmp snooping max-member-num 1024
This example shows how to return the max member number to default value.
Switch(config)# no ip igmp snooping max-member-num
Related Commands
ip igmp snooping
22.5 ip igmp snooping query-interval
Use this command to set the igmp snooping query-interval.
To return the query-interval to default value, use the no form of this command.
Command Syntax
ip igmp snooping query-interval <2-18000>
no ip igmp snooping query-interval
<2-18000>: the query-interval of igmp snooping (seconds)
Command Mode
Global configuration
Defaults
125 seconds
Usage