CANOGA PERKINS 9175 Command Reference - Manual (Page 764)

CanogaOS Command Reference
44-9
md5 (Optional) Specifies the HMAC-MD5 authentication level.
sha (Optional) Specifies the HMAC-SHA authentication level.
auth-password (Optional) String that enables the agent to receive packets from the host.
privacy (Optional) Specifies the use of the User-based Security Model (USM) for
SNMP version 3 for SNMP message level security.
aes (Optional) Specifies the use of the Advanced Encryption Standard (AES)
algorithm for encryption.
des (Optional) Specifies the use of the Digital Encryption Standard (DES)
algorithm for encryption.
privpassword (Optional) String that specifies the privacy user password.
Default
No SNMPv3 users are configured.
Command Mode
Global configuration
Usage
To configure a remote user, specify the IP address or port number for the remote SNMP agent of the
device where the user resides.
Examples
The following is sample output from the snmp-server usm-user command:
Switch(config)# snmp-server usm-user user1 authentication md5 mypassword privacy des
yourpassword
Related Commands
snmp-server engineID
44.13 snmp-server version
To specify the support of SNMP version, use the snmp-server version command in global configuration
mode. To restore to the default value, use the no form of this command.
Command Syntax
snmp-server version {all | v1 | v2c | v3}
no snmp-server version
all Support all versions (v1, v2c, and v3).
v1 Support only v1 version.
v2c Support only v2c version.
v3 Support only v3 version.
Default
Support all SNMP versions.