CANOGA PERKINS 9175 Command Reference - Manual (Page 586)

CanogaOS Command Reference
32-11
32.15 qos-policy sap-egress
Use this command to apply an SAP egress policy to a specific EVC at the egress UNI. To remove an
SAP egress policy for the EVC, use the no form of this command.
Command Syntax
qos-policy sap-egress POLICY-NAME
no qos-policy sap-egress
POLICY-NAME: This field specifies which SAP egress policy is used to be associated to the EVC.
Command Mode
Ethernet EVC Configuration
Usage
None
Examples
In the following example, the qos evc sap-egress command is used to associate a QoS SAP egress
policy to an EVC and then applied it to interface eth-0-2.
Switch(config)# ethernet evc evc100
Switch(config-evc)# qos-policy sap-egress evc110-policy-at-egress-uni
Related Commands
None
32.16 qos-policy net-egress
Use this command to apply a network egress policy to a specific EVC at the egress NNI. To remove a
network egress policy for the EVC, use the no form of this command.
Command Syntax
qos-policy net-egress POLICY-NAME
no qos-policy net-egress
POLICY-NAME: This field specifies which network egress policy is used to be associated to the EVC.
Command Mode
Ethernet EVC Configuration
Usage
None