CANOGA PERKINS 9175 Command Reference - Manual (Page 408)

CanogaOS Command Reference
24-13
This example shows how to enable pim sparse mode on the interface.
Switch(config-if)# ip pim sparse-mode
This example shows how to disable pim sparse mode on the interface.
Switch(config-if)# no ip pim sparse-mode
This example shows how to enable pim sparse mode passive on the interface.
Switch(config-if)# ip pim sparse-mode passive
Related Commands
None
24.21 ip pim unicast-bsm
Use this command to enable sending and receiving of unicast BSM for backward compatibility.
To cancel this setting, use the no form of this command.
Command Syntax
ip pim unicast-bsm
no ip pim unicast-bsm
Command Mode
Interface configuration
Usage
Interface will send BSM message to the whole pim domain by default.
Examples
This example shows how to enable sending and receiving of unicast BSM for backward compatibility.
Switch(config-if)# ip pim unicast-bsm
This example shows how to cancel this setting.
Switch(config-if)# no ip pim unicast-bsm
Related Commands
None
24.22 show ip pim sparse-mode bsr-router
Use this command to show the information of bootstrap router.
Command Syntax
show ip pim sparse-mode bsr-router
Command Mode
EXEC