CANOGA PERKINS 9175 Command Reference - Manual (Page 761)

CanogaOS Command Reference
44-6
show snmp-server notify
44.8 snmp-server system-contact
To set the system contact (sysContact) string, use the snmp-server system-contact command in
global configuration mode. To remove the system contact information, use the no form of this command.
Command Syntax
snmp-server contact text
no snmp-server contact
text String that describes the system contact information.
Default
No system contact string is set.
Command Mode
Global configuration
Usage
Examples
The following is an example of a system contact string:
Switch(config)# snmp-server system-contact [email protected]
Related Commands
snmp-server system-location
44.9 snmp-server system-location
To set the system location string, use the snmp-server system-location command in global
configuration mode. To remove the location string, use the no form of this command.
Command Syntax
snmp-server system-location text
no snmp-server system-location
text String that describes the system location information.
Default
No system location string is set.
Command Mode