CANOGA PERKINS 9175 Command Reference - Manual (Page 204)

CanogaOS Command Reference
14-11
Command Syntax
passive-interface interface-id
no passive-interface interface-id
interface-id The interface name.
Default
Routing updates are sent on the interface.
Command Mode
Router configuration
Usage
If you disable the sending of routing updates on an interface, the particular subnet will continue to be
advertised to other interfaces, and updates from other switches on that interface continue to be received
and processed.
Examples
The following example sets the interface eth-0-1 as passive:
router rip
network 10.108.0.0/16
passive-interface eth-0-11
!
Related Commands
router rip
14.15 redistribute (RIP)
To redistribute routes from one routing domain into RIP routing domain, use the redistribute command
in router configuration mode. To disable redistribution, use the no form of this command.
Command Syntax
redistribute protocol [metric value]
no redistribute protocol
protocol (Optional) The name of a routing protocol, or the keyword connected, or
static. If you specify a routing protocol, use one of the following keywords:
bgp, and ospf.
metric value (Optional) When redistributing other routing process to the RIP process, the
default metric is 1 if no metric value is specified.
Default
Route redistribution is disabled.
metric metric-value: 1