CANOGA PERKINS 9175 Command Reference - Manual (Page 33)

CanogaOS Command Reference
2-2
This example shows you how to access global configuration mode:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
The supported commands can vary depending on the version of software in use. To
view a comprehensive list of commands, enter a question mark (?) at the prompt:
Switch(config)# ?
To exit global configuration command mode and to return to privileged EXEC mode,
enter the end or exit command, or press Ctrl-Z.
2.3 Interface Configuration Mode
Interface configuration commands modify the operation of the interface. Interface
configuration commands always follow a global configuration command, which defines
the interface type.
Use the interface interface-id command to access interface configuration mode. The
new prompt means interface configuration mode.
Switch(config-if)#
The supported commands can vary depending on the version of software in use. To
view a comprehensive list of commands, enter a question mark (?) at the prompt:
Switch(config-if)# ?
To exit interface configuration mode and to return to global configuration mode, enter
the exit command.
To exit interface configuration mode and to return to privileged EXEC mode, enter the
end command, or press Ctrl-Z.
2.4 config-vlan Mode
Use this mode to configure normal-range VLANs (VLAN IDs 1 to 4094), and you can
save it to the switch startup configuration file by using the copy running-config
startup-config privileged EXEC command. The configurations of VLAN IDs 1 to 4094
are saved in the VLAN database
Enter the vlan database global configuration command to access config-vlan mode:
Switch(config)# vlan database
Switch(config-vlan)#
The supported keywords can vary but are similar to the commands available in VLAN
configuration mode. To view a comprehensive list of commands, enter a question mark
(?) at the prompt:
Switch(config-vlan)# ?
2.5 VLAN Configuration Mode
You can use the VLAN configuration commands to create or modify VLAN parameters
for VLAN IDs 1 to 4094.