25 ldp commnands, 1 advertise-labels for – CANOGA PERKINS 9175 Command Reference User Manual
Page 413
CanogaOS Command Reference
25-1
25 LDP
Commnands
25.1 advertise-labels for
Use this command to specify which destinations have their labels advertised to
LDP neighbors. Use the no parameter to specify which destinations do not
have their labels advertised to LDP neighbors
Command Syntax
(no) advertise-labels for PREFIX_ACL to {PEER_ACL | any}
Syntax Description
PREFIX_ACL Destinations which have their labels
advertised.
PEER_ACL
LDP neighbors which receive these
advertisements.
any
All LDP neighbors.
Command Mode
Router mode
Defaults
The labels of all destinations are advertised to all LDP neighbors.
Examples
In the following example, the advertise-labels for command is used to specify
which destinations have their labels advertised to all LDP neighbors:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)#
advertise-labels for prefix-acl to any
Related Commands
advertise-labels for any to none,
advertise-labels for prefix-acl to peer-acl
clear ldp adjacency
Use this command to clear an adjacency with a specified peer (IP address
A.B.C.D), or to clear all adjacencies for the current LSR.
Command Syntax
clear ldp adjacency {A.B.C.D |*}
Syntax Description