CANOGA PERKINS 9175 Command Reference - Manual (Page 324)

CanogaOS Command Reference
18-5
18.7 IP SLA MONITOR SCHEDULE
To enable an IP SLA entry, use ip sla monitor schedule in CONFIG mode.
To disable an IP SLA entry, use the no form of this command.
Command Syntax
ip sla monitor schedule entrynumber
no ip sla monitor schedule entrynumber
Syntax Description
entrynumber Entry number is used to identify ip sla monitor
entry, its range is from 1 to 500;
Command Mode
Global configuration
Defaults
none
Examples
In the following example, the ip sla monitor schedule command is used to enable an ip sla
monitor entry:
Switch(config)#ip sla monitor schedule 1
Related Commands
Show ip sla monitor
18.8 SHOW IP SLA MONITOR
To show IP SLA entries, use show ip sla monitor in EXEC mode.
Command Syntax
show ip sla monitor schedule (entrynumber)
Syntax Description
entrynumber Entry number is used to identify ip sla monitor
entry, its range is from 1 to 500;
Command Mode
Exec mode
Defaults
none