CANOGA PERKINS 9175 Command Reference - Manual (Page 627)

CanogaOS Command Reference
35-3
35.4 show ip source binding
Use the show ip source binding privileged EXEC command to display the IP source bindings on the
switch.
Command Syntax
show ip source binding [interface interface-id]
interface interface-id Display IP source bindings for a specified interface.
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show ip source binding command:
Switch# show ip source binding
IP source guard binding table:
VLAN MAC Address Type IP Address Interface State
================================================================
1 00:01:00:01:00:01 static 10.10.1.1 eth-0-13 Disabled
Related Commands
ip source binding