CANOGA PERKINS 9175 Command Reference - Manual (Page 676)

CanogaOS Command Reference
40-5
40.7 ip ssh server rekey-interval
To configure Secure Shell (SSH) rekey interval on your switch, use the ip ssh server rekey-interval
command in global configuration mode. To restore the default value, use the no form of this command.
Command Syntax
ip ssh server rekey-interval minute
no ip ssh server rekey-interval
minute The rekey interval, with a maximum of 1440 minutes.
Default
The default interval is 60 minutes.
Command Mode
Global configuration
Usage
Examples
The following examples configure SSH rekey interval on your switch:
Switch(config)# ip ssh server rekey-interval 30
Related Commands
show ip ssh server status
40.8 ip ssh server version
To configure Secure Shell (SSH) version on your switch, use the ip ssh server version command in
global configuration mode. To restore the default value, use the no form of this command.
Command Syntax
ip ssh server version {1 | 2 | all}
no ip ssh server version
1 Switch runs only SSH Version 1.
2 Switch runs only SSH Version 2.
all Version 1 and Version 2 are both supported.
Default
The default SSH version is 2.
Command Mode
Global configuration